1650WA 280 watt Push-Pull Output Transformer

280 Watts - 1,900ct - 806mA

Suggested tubes 6L6GC, 5881, EL34, 6550B, KT88 

A bit about the 1608A-1650A Series

• A new and improved version of Hammonds 1608-1650 Series multiple secondary output transformers
  • re-designed secondaries for easy hook-up of secondary loads).
• Designed for push-pull tube output circuits.
• Units are designed to provide ample "headroom" at bass frequencies
• note the weight of each transformer).
• All models have a secondary tapped for 4, 8 or 16 ohm outputs.
• Enclosed (shielded), 4 slot, above chassis Type "X" mounting.
• Manufactured with plastic coil forms for coil support and insulation.
• Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz) minimum.
• Insulated flexible leads 8" min.
• All units (except the 1650G) include 40% screen taps for Ultra-Linear operation (if desired).
• Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.
  • The 1650G does NOT have primary screen taps and will not support "Ultra-Linear" applications.

Can't find what you're looking for? perhaps this table will help.