Hammond 1627SEA

Single-Ended Hi-Fi Output Transformer

30 watts - 2,500 ohms - 160mA - 20H

Features

• "Overdesigned" for high fidelity, single-ended, Class-A, tube output circuits (triode, tetrode or pentode tubes).
• Enclosed (shielded), four slots, chassis Type "X" mounting.
• Frequency response at least 20 Hz. to 20 kHz. at full rated power (+/- 1 dB max., ref. 1 kHz.)
• Insulated flexible leads 8" min.
• For maximum versatility, all units (except the 1642SE & 1638SEA) include a 40% screen tap for Ultra-Linear, tetrode/pentode operation (if desired). The 1642SE & 1638SEA do NOT include this screen tap as they were designed principally for high impedance triode tubes.
• High-quality laminations, (M6) grain oriented silicon steel.
• The core is gapped to reduce core saturation in Class-A tube amplifier circuits.
• For general purpose or replacement use in single ended tube output circuits see our 125SE Series

Can't find what you're looking for or looking for more detail on these transformers, then try here