Tube Output (25 - 75 Watts) Single Ended - HI-FI 1627-1642 Series

Tube Output (25 - 75 Watts) Single Ended - HI-FI 1627-1642 Series​

Features

  • "Overdesigned" for high fidelity, single-ended, Class-A, tube output circuits (triode, tetrode or pentode tubes).
  • Enclosed (shielded), four slots, chassis Type "X" mounting.
  • Frequency response at least 20 Hz. to 20 kHz. at full rated power (+/- 1 dB max., ref. 1 kHz.)
  • Insulated flexible leads 8" min.
  • For maximum versatility, all units (except the 1642SE & 1638SEA) include a 40% screen tap for Ultra-Linear, tetrode/pentode operation (if desired). The 1642SE & 1638SEA do NOT include this screen tap as they were designed principally for high impedance triode tubes.
  • High-quality laminations, (M6) grain oriented silicon steel.
  • The core is gapped to reduce core saturation in Class-A tube amplifier circuits.
  • For general purpose or replacement use in single ended tube output circuits see our 125SE Series
Part No. Audio Primary Ultra-Linear Secondary Hipot Weight Overall Dimensions Mounting
Impedance Max. DC Inductance 40% Primary Impedance Test Slot
Watts (Ohms) Bias Tap (Ohms) (VRMS) (lbs.) A B C D E G
1626SEA 25 600 200 ma. 2.9 Henrys Yes 4-8-16 2000 11 95 113 116 76 84 5 x 10
1640SEA 30 1250 200 ma. 14 Henrys Yes 4-8-16 2000 11 95 126 116 76 99 5 x 10
1627SEA 30 2500 160 ma. 20 Henrys Yes 4-8-16 2000 11 95 114 116 76 97 5 x 10
1630SEA 30 3500 135 ma. 42 Henrys Yes 4-8-16 2000 11 95 126 118 76 99 5 x 10
1628SEA 30 5000 120 ma. 48 Henrys Yes 4-8-16 2000 11 95 114 116 76 97 5 x 10
1642SE 75 5000 300 ma. 53 Henrys No 4-8-16 3500 28 111 191 133 89 149 5 x 10
1629SEA 30 6500 100 ma. 55 Henrys Yes 4-8-16 2000 11 95 114 116 76 99 5 x 10
1638SEA 30 10000 90 ma. 88 Henrys No 4-8-16 2000 11 95 124 116 76 99 5 x 10
  • RED wire connects to B+
  • BLUE/YELLOW wire connects to screen (optional use)
  • BLUE wire connects to the tube plate
  • The 1642SE & 1638SEA do not include a primary screen tap (as they are designed for triode applications).

 

Suggested Tube Types:

Part No. Triodes Pentodes
1626SEA 6C33 -
1640SEA Parallel - 2A3, 6A3, 6B4G, 300B, 572B, 811A Parallel - 6550, 6CA7
1627SEA 2A3, 6A3, 6B4G, 300B 6CA7, 6L6, 807, 5881, 6550, Parallel - 6AQ5, 6V6, EL84
1630SEA 2A3, 6A3, 6B4G, 300B 6CA7, 6L6, 807, 5881, 6550, Parallel - 6AQ5, 6V6, EL84
1628SEA 211, 300B, 572B, 811A 6AQ5, 6V6, 6L6, 807, 5881, 6550, EL84
1642SE Parallel - 211, 572, 811A, 845 -
1629SEA 211, 811A, 572B, 845 6AQ5, 6V6, 6L6, 807, 5881, 6550, EL84
1638SEA 211, 845 -
Notes: The above examples of possible combinations are to help you narrow down the choices of transformers for your favourite tube types. How you operate the tubes (ultra-linear, bias, plate voltage, operating points, etc.) will change optimum plate load impedance. Only a few of the most popular tubes are shown. A tube manual or tube manufacturer's technical data sheets should be consulted first, before making a decision on a proper output transformer.