5E3 Chassis Narrow High Polish Chrome. 

There are various Tweed Deluxe types and this is one of the trim fit chassis.

please review the specifications sheet so you understand the build  

To ensure your project is successful we recommend the following Parts

Selecting any sockets and fuse holders other than the items listed above may not fit in your chassis and may delay you build so be careful when ordering.

Please note: This chassis is made from steel. If drilling is required, you should drill from the inside of the chassis, starting with a drill punch, using drill bits designed for steel -  "Do not drill on the external mirror surface"

Some advice:

1. Selecting the pieces mentioned above will help you complete your project with less stress. 

2. Drilling the turret board to match the chassis is a lot easier than drilling the chassis to match the board. 

 

SKU 5e3chassis
Brand Generic
Shipping Weight 1.1000kg
Shipping Width 0.360m
Shipping Height 0.240m
Shipping Length 0.180m
Unit Of Measure ea

Looks great, sturdy, but cannot drill

By: on 27 November 2021
Looks great and sturdy, but cannot drill into chassis, especially drilling out the valve socket holes. Previously bought chassis from evatco were super easy to work with, and drill, but not these unfortunately.
(2)

Really bad!!

20 November 2021
Usually a big fan of Evatco but this chassis is awful. The main issue - you can't drill a hole in it. I have no idea what it's made from. Never encountered anything like it. So, forget chassis ground bolts or being able to mount the very circuit boards that evatco sell. You have to use the preexisting holes (which there aren't enough of) or nothing. Also, the power tube holes are too small for the normal 30mm quality sockets. Very disappointing.
(1)

Solid product

5 July 2020
Bought this chassis in 2109 for a 5e3 build. Sturdy metalwork with all holes drilled and good plating and labels.
(5)

Write a product review

We Also Recommend

Related products

More From This Category