Solid Core Vintage Look Cloth Covered Wire

#20 Single core copper wire with insulation and lacquered cotton braid, 600 volt

Sold per metre and cut to length, e.g. order 2 and receive one x 2 metre length of wire

Outer diameter 3.1 mm approx.

Available in 8 different colours

  • Black
  • Blue
  • Brown
  • Green
  • Orange 
  • Red
  • White
  • Yellow

Please note, as wire is cut to order, we cannot offer returns on this product

Wire rating.

Whilst many people choose to use push back wiring for their vintage look amp, you should be aware that rating agencies such as UL and CSA do not recognise the textile coatings on these wires as a suitable insulation material; therefore, they will not assign a temperature or voltage rating to these wires. 

For peace of mind, select our teflon coated wire found here.

SKU M-Wiresolid
Brand Generic
Shipping Weight 0.0100kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.050m

Perfect for quality builds.

By: on 18 May 2026
Exactly what I'd hoped for, was a bit worried it would either be annoying to work with or flimsy but easiest wire I've worked with so far, despite the thickness I find it's easier than most things to poke through. Colours all look good too. Going to use it in all builds now.
(5)

good heater / filament wire

By: on 14 December 2021
heater / filament wiring can be tedious, especially with stranded wire, but this single core wire is pretty easy to work with. good OG vintage-looking wire, with robust insulation. may be a bit thick/chunky for some tighter builds, but worked fine for my small preamp build.
(4)

Write a product review

We Also Recommend

Related products

More From This Category