Hammond 124 Series Tube drivers 

Interstage Transformers 

124 Series Tube Driver - Interstage Transformers
Part Watts Primary
Impedance
ohms
DC
Resistance
ohms 
Secondary
Impedance
Ohms
Secondary
 DC Resistance
ohms
Winding
124A 5 watts 10k 403 90k C.T 1524 C.T
124B 5 watts 10k 403 90k C.T 1500 C.T
124C 5 watts 10k 403 90 C.T  1524 C.T
124D 5 watts 7k C.T 454 15.8k C.T 681 C.T
124E 5 watts 15k C.T 728 33.8k/135k 3880 Dual
124F 5 watts 15k C.T 900 3.75k/15k 899.5 Dual
  • Designed for general purpose or replacement use in push-pull or phase inverter tube driver circuits.
  • Should not be used for single-ended applications. They have no gap for DC bias current present in SE mode.
  • Open style with minimum 5" long primary leads.
  • Minimum frequency response 150 Hz. - 15 Khz (+/- 1db max. ref. 1 Khz.) at full rated power.
  • Part number 124B is the same as our 124A except for 49% Nickel laminations for greater fidelity.
  • Part number 124C is the COIL ONLY (for those experimenters who want to use their own "iron").

Hook Up Data

  • For Parallel connected operation (33.8K Ohm Secondary):
    • Connect the GRN/YEL wire to the GRN wire AND the BLK/YEL wire to the BLK wire.
  • For Series connected operation (135K Ohm Secondary):
    • Connect the BLK/YEL wire to the GRN (this becomes the centre tap) - GRN/YEL and BLK wires are the output.
 
SKU 124series
Brand Hammond
Shipping Weight 0.6000kg
Shipping Width 0.060m
Shipping Height 0.060m
Shipping Length 0.060m
Unit Of Measure ea

Be The First To Review This Product!

Help other Evatco users shop smarter by writing reviews for products you have purchased.

Write a product review