IN STOCK!
* In response to requests from RCA Radiola III-A collectors Hammond developed a replacement audio transformer about 20 years ago...
* The original transformers are usually found with "open" windings due to the fine wire and high turns used, coupled with age...
* These replacement units were originally sold through the AWA (The Antique Wireless Association). Hammond resurrected the design & are now offering them once again to collectors...
* This is a universal replacement type - it will replace ANY of the 3 audio transformers used (1st audio driver, second audio - phase splitter stage or output transformer), by correctly connecting the 5 lugs. A pin out and connection diagram is included.
* The cases from the old transformer will fit this new unit perfectly...
* The terminal board (included as shown above) is a duplicate of the original...
Key Features:
* Primary: 4,000 turns, #41 wire (lugs 4 & 2)
* Secondary: 12,000 turns C.T., #41 wire (lugs 5 & 1, lug 3 is C.T. connection)
* Termination: Solder lugs on a 1 3/4" x 1" terminal board with 4 - 5" connecting leads
* Size: 1 7/8" long x 1 11/16" wide x 1 3/8" deep
* Lamination Core Size: 5/8" x 1/2"
* Weight: 7 oz.
* Mounting: uses existing case (see above)